Packard Bell 100 User Manual

Packard BellVibe 100Disassembly Manual

Packard Bell Vibe 100 Disassembly Manual99. Make sure the hold switch is properly aligned (see Fig. 7)Fig. 7 The hold switch

10Packard Bell Vibe 100 Disassembly ManualNoticeThe information in this guide is subject to change.This guide contains information protected by copyri

1Packard Bell Vibe 100 Disassembly ManualTable of ContentsOverview 2Technician Notes 2Disassembly Instructions 2Reassembly Instructions 2Required Tool

2Packard Bell Vibe 100 Disassembly ManualOverviewThis document contains step-by-step disassembly instructions for the Vibe 100 MP3player. The instruct

3Packard Bell Vibe 100 Disassembly ManualHazardous VoltageThere is hazardous voltage present inside theMP3 player when it is connected to an ACsupply,

Packard Bell Vibe 100 Disassembly Manual4MP3 mientras la cubierta esté quitada.WAARSCHUWINGZorg er voor dat alle verbindingen van ennaar de MP3 speler

5Packard Bell Vibe 100 Disassembly ManualOpening the CasingTo open the player, perform these following steps:1. Gently pry the bottom and the top cov

Packard Bell Vibe 100 Disassembly Manual6Fig. 2 Location of the battery connector4. Release the connector on the mainboard. Use a small flatheadscrew

Packard Bell Vibe 100 Disassembly Manual72. Disconnect the flat cable from the hard disk. To do so, lift up thedark-coloured clip and pull out the fl

Packard Bell Vibe 100 Disassembly Manual8Fig. 5 The HDD connector.5. Push the side panel of the top cover gently aside.6. The mainboard is loose now