Packard-bell dot s series User Manual download pdf (Page 97)

Regulatory information - 95

The EMC performance of the system is guaranteed only if the cable and interface use

efficient shielding.

The use of shielded interface cable is required for USB, IEEE1394, serial, printer, game,

analog or digital audio/ video, PS2, TV or FM antennas, and generally all high-speed

cable interfaces.

Use only UL Listed No. 26AWG or larger telecommunication cords.

Only Ethernet LAN or RTC modem cable can have length exceeding 3 metres.

Packard Bell recommends that you add a ferrite core round clip to each cable connecting

your computer to a hardware device that was not included with your computer.

- Ferrite reference: 28A-2029 from Steward (two loops)

During product certification, Packard Bell used the following cable quality:

- USB2.0 Certified Cables from Hama 46778

- IEEE1394 shielded FireWire from Hama 50011

- RCA-RCA shielded Audio/Video Cables from Thomson KHC001M, KHC012M,

KHC028M

- Stereo Jack shielded Audio cables from Hama 43330H, 42714H

Heat Build-up and Portable Computers

The AC adapter and the underside of the computer can become hot after prolonged use.

Sustained physical contact with either should be avoided.

HASSIS COVER REMOVAL AND REPLACEMENT

Before removing the chassis cover to service or modify the equipment, you must

disconnect all power and modem cords, and remove or disable the battery.

- Caution: Some components inside the computer can become hot after prolonged

use.

You then must close the chassis before you plug in and switch on the equipment.

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 226 227

No comments

Packard-bell dot s series User Manual Page 97