Packard-bell EasyNote B3 User Manual download pdf (Page 12)

Picture 15. LCD Switch

LCD Screen Disassembly

LCD Lid Assembly

To remove the LCD lid assembly, perform the following steps:

1. Remove the keyboard top cover as described above.

2. Remove the LCD hinge covers; these are ‘clicked’ in place on the backside of the

notebook. The easiest way is to leverage them slightly using a flat-head

screwdriver.

3. Disconnect the LCD cables.

4. Disconnect the WLAN antenna. To do so, remove the CPU, the memory, and the

mini PCI cover as described in WiFi LAN Adapter (Mini PCI)

. The antenna is

clicked onto the mini PCI card (see Picture 4).

5. Note that the antenna might be secured on the main board or CPU fan using tape.

Remove the tape temporarily to release the antenna cable.

6. Remove the 2*2 screws in the 2 LCD hinges.

7. Gently lift the LCD screen assembly and ensure the WLAN antenna cable is free to

move as well.

LCD Bezel

To remove the LCD bezel, perform the following steps:

1. Remove the 2 mylars near the hinges.

2. Remove the 2 outer rubber stoppers, located on the top of the screen; the middle

rubber does not need to be removed.

3. Remove the 4 screws (Picture 16

4. Remove the LCD bezel.

1 2 ... 7 8 9 10 11 12 13 14 15

No comments

Packard-bell EasyNote B3 User Manual Page 12